Graupner - Adattatore Telemetria NAZA-Hott.
Description:
With this adapter the DJI NAZA telemetry data will be converted in HoTT telemetry data and will be shown in the Graupner/SJ HoTT transmitter.
The AnySense Telemetry Module was conceived specifically for the use with DJI NAZA flight control systems. The AnySense can provide telemetry informations in real time, to show you important information about the state of the model during the flights.
It can show current, flight speed, height, distance from starting point, GPS coordinates, GPS satellites count etc'
The telemetry informations are sent to the telemetry-capable receiver, so that the telemetry data can be comfortably seen on the transmitter to give you a new flight experience.
The AnySense should be used in combination with a DJI Autopilot system. It offers two telemetry outputs, which can be configured through a Windows app. The AnySense telemetry module supports online upgrades.
The AnySense module is equipped with many voltage warning thresholds for Graupner/SJ HoTT. It supports the FrSky S-Port protocol too.
It is required a CAN-BUS cable 33642.4 or CP.WK.000036 for connection.
The AnySense will be connected to NAZA-M or NAZA-M V2 through PMU V2.
To configure by PC it will be necessary the USB cable #33462.1.
A connection cable for MAVLINK OSD is available and it allows, with the appropriate OSD modules, to see the data representation in the On Screen Display in the telemetry goggles.
Content of the package:
1x AnySense Telemetry Module. Connect the AnySense to DJI Autopilot system by CAN-BUS cable. The AnySense communicates with the flight controller, receives data from the flight controller and transfers the whole information to the R/C receiver.
1x R/C telemetry cable. Connect the AnySense to the R/C receiver by this cable.
Specification:
All-up weight, approx.: 5 g
Dimensions (LxWxH): 21 x 30 x 10 mm
Description:
With this adapter the DJI NAZA telemetry data will be converted in HoTT telemetry data and will be shown in the Graupner/SJ HoTT transmitter.
The AnySense Telemetry Module was conceived specifically for the use with DJI NAZA flight control systems. The AnySense can provide telemetry informations in real time, to show you important information about the state of the model during the flights.
It can show current, flight speed, height, distance from starting point, GPS coordinates, GPS satellites count etc'
The telemetry informations are sent to the telemetry-capable receiver, so that the telemetry data can be comfortably seen on the transmitter to give you a new flight experience.
The AnySense should be used in combination with a DJI Autopilot system. It offers two telemetry outputs, which can be configured through a Windows app. The AnySense telemetry module supports online upgrades.
The AnySense module is equipped with many voltage warning thresholds for Graupner/SJ HoTT. It supports the FrSky S-Port protocol too.
It is required a CAN-BUS cable 33642.4 or CP.WK.000036 for connection.
The AnySense will be connected to NAZA-M or NAZA-M V2 through PMU V2.
To configure by PC it will be necessary the USB cable #33462.1.
A connection cable for MAVLINK OSD is available and it allows, with the appropriate OSD modules, to see the data representation in the On Screen Display in the telemetry goggles.
Content of the package:
1x AnySense Telemetry Module. Connect the AnySense to DJI Autopilot system by CAN-BUS cable. The AnySense communicates with the flight controller, receives data from the flight controller and transfers the whole information to the R/C receiver.
1x R/C telemetry cable. Connect the AnySense to the R/C receiver by this cable.
Specification:
All-up weight, approx.: 5 g
Dimensions (LxWxH): 21 x 30 x 10 mm